CERAFLUX - 49 is an off-white coloured powder flux used for copper base alloys during melting. Pure copper or copper alloys are very difficult to melt and are very susceptible to gassing. In case of alloys the oxidation losses of alloying element should be reduced.
Under the coating cover of CERAFLUX- 49 both oxidation losses and the pickup of hydrogen from moisture in the atmosphere are prevented.
The percentage addition of CERAFLUX – 49 is 1% on metal weight for good scrap. For turning/ boring etc. type of scrap 3-4% CERAFLUX – 49 is required on the metal weight.
The flux is added in 3 stages. Initial 1/3rd part is to be added along with scrap. Then second dose when the melt is in mushi stage and final after deoxidizing the melt by deoxidizing tubes. After achieving the desired temperature rabble the melt. Then pour the metal, keeping the cover of flux on the melt.
- Reduces the oxidation so costly alloying elements are saved as well as maintain the grade properly.
- Creates a reducing atmosphere required for Cu-alloys
- Cleans metal and remove non-metallic inclusion.
- Increase in metal yield.
Flux is hygroscopic in nature so store in dry atmosphere.
25, 50 kg HDPE bag.