• DIEDRESS - 2208


  • DIEDRESS-2208 is a water base die coat required for pressure die castings of aluminium based alloys.
  • DIEDRESS-2208 mainly contains petroleum oil, polymeric compound and additives.


  • DIEDRESS-2208 is used for die cooling and easy release of aluminium based castings.
  • Higher Dilution ratio.
  • Excellent release & metal flow propertie.
  • No staining to the casting.
  • No depositions on die solder.
  • Excellent anti-weld properties.
  • Pleasant smell.
  • Homogeneous emulsion without separation.
  • It is to be diluted with water @ 1:80 to 100 stir well before use.
  • It is to be applied by auto spray/ manual spraying.
  • Appearance :-  off white Liquid.
  • Specific Gravity :-  0.97 to 1.00
  • Viscosity B4 cup :-  13 to 16 secs
  • pH (as it is) :-  7 - 9
  • Dilution ratio vary with geometry of castings.
  • For dilution, De-ionized water is advisable in 'Hard Water' areas.
  • 20 Kg. HDPE bucket.

Shelf Life - 6 months from the date of manufacturing in closed intact packing.

Note:  Mix well the content of the can before dilution for uniform results.

Note - Above information is true and accurate based on controlled laboratory testing. However user is responsible for determining suitability for application at their end. No guarantee is implied since the condition in actual use differs widely & beyond our control.