DIEDRESS-2307M is a Water Base Die coat required for Pressure Die castings of Aluminium Based Alloys. DIEDRESS-2307M mainly contains petroleum oil, polymeric compound and additives.


DIEDRESS-2307M is used for Die cooling and easy release of Aluminium Based Castings.


  • Higher Dilution ratio
  • Excellent releasing properties
  • No staining to the casting
  • No depositions on die
  • Excellent anti-weld properties
  • No odd smell
  • Homogeneous emulsion without settling
  • Suitable for dilution with hard water

Application Method

  • It is to be diluted with Water @ 1:80 to100 Stir well before use.
  • It is to be applied by Spraying.


The physical property of CRAFTANOL-31 is as follows

Appearance Off-White Liquid
Specific Gravity 0.99 to 1.00
Viscosity B4 cup 20 - 26 secs.
pH (as it is) 7-9


  • Dilution ratio for intricate castings should be low.
  • For dilution, De-ionized water is advisable.

Standard Packing

  • 20 Kg. P.C.

Shelf Life

  • 6 months from the date of manufacturing

Note: Mix well the content of the can before dilution for uniform results.

Material Safety Data Sheet (MSDS) is Available on Request

Our Products

We offer a wide range of foundry products and services to meet the requirements of iron, steel and non-ferrous
foundries to help them to reduce defects, improve casting quality and optimise production costs.